Stroj & Les Cerknica

Clamp carriers for cold edge gluing and lamination for wooden stock

Clamp carriers for cold edge gluing and lamination for wooden stock

The SL clamp carriers are intended for edge gluing and lamination of wooden stock whose joints are dried naturally. They require very little room and their modular design allows gradual expendability to meet the desired capacity. They are very simple to maintain and to operate. Wooden elements, on the edges of which the glue has already been applied, are stacked into clamps, organized in sections which are driven by an endless chain and may, therefore, be adjusted so as to form various sizes of cured stock. Clamps may accommodate wooden elements from 25 to 90 thick. Additional elements are to be applied in order to obtain narrower or thicker stock, such as:12-25 mm – pannel flattener, 90-160 mm – adapters. Clamps may be tightened manually or by way of a manually or automatically driven pneumatic or hydraulic motor.

The SLT, SLE, SLP, SLR type clamp carriers are mainly intended for small branches and workshops. This type of clamp carriers allows manual tightening of clamps or with hand air tightening motor.

SL-6-8_3000_x_1000_-removebg-preview
SL_6-10__4000_x_1000_-HIDRAULIK-removebg-preview
SL_6-16__6000_x_1300__-_HIDRAULIK-removebg-preview
SL_6-6000-1300_-_PNEUMATIK-removebg-preview
SL_14_-_8_-__3000_x_1300__-HIDRAULIK-removebg-preview
SL_14-12_-_4500_x_1000__-_HIDRAULIK_-TWIN-removebg-preview
SL14_-16__6000_x_1200__-HIDRAULIK_-TWIN-removebg-preview
SLM_6-8_-_3000_-_1000__PNEVMATIK-removebg-preview